
©2015 Check Point Software Technologies Ltd. All rights reserved. [Protected] Non-confidential content | April 6, 2015
Check Point 2200 Appliance | Datasheet
SPECIFICATIONS
PERFORMANCE
121 SecurityPower
1.4 Gbps firewall throughput
150 Mbps firewall and IPS throughput
RFC 3511, 2544, 2647, 1242 PERFORMANCE
(LAB)
3 Gbps firewall, 1518 byte UDP
400 Mbps VPN, AES-128
20,000 max IPsec VPN tunnels
300 Mbps IPS, Recommended IPS profile, IMIX traffic
blend
1.2 million concurrent connections, 64 byte HTTP response
25,000 connections per second, 64 byte HTTP response
EXPANSION OPTIONS
6 x 10/100/1000Base-T RJ45 ports
250 GB hard disk drive
External AC to DC power adaptor
NETWORK
IPv4 and IPv6
1024 interfaces or VLANs per system
4096 interfaces per system (in Virtual System mode)
802.3ad passive and active link aggregation
Layer 2 (transparent) and Layer 3 (routing) mode
CLUSTERING
Active/Active - L3 mode
Active/Passive - L3 mode
Session synchronization for firewall and VPN
Session failover for routing change
Device failure detection
Link failure detection
ClusterXL or VRRP
PHYSICAL
AC Input Voltage: 100 - 240V
Frequency: 50 - 60 Hz
Single Power Supply Rating: 40 W
Power Consumption Maximum: 35 W
Maximum thermal output: 119.4 BTU
Enclosure: Desktop
Standard (W x D x H): 8.27 x 8.25 x 1.65 in.
Metric (W x D x H): 210 x 209.5 x 42 mm
Weight: 2.0 kg (4.4 lbs.)
Operating Environmental Conditions
Temperature: 32° to 104°F / 0° to 40°C
Humidity: 20%-90% (non-condensing)
Temperature: –4° to 158°F / –20° to 70°C
Humidity: 5% to 95% @60°C
Safety: CB, UL/cUL, CSA, TUV, NOM, CCC, IRAM,
PCT/GoST
Emissions: FCC, CE, VCCI, C-Tick, CCC, ANATEL, KCC
Environmental: RoHS
1
Check Point's SecurityPower is a new benchmark metric that allows customers
to select security appliances by their capacity to handle real-world network traffic,
multiple security functions and a typical security policy.
Commentaires sur ces manuels